What to check after windshield replacement
Safety and visibility on the road rely heavily on the condition of your vehicle’s windshield. So, when the time comes to replace your windshield due to a chip, crack, or more severe damage, ensuring the job has been done right is crucial. Once your car’s windshield has been replaced, there are several things you should check to ensure the installation process was carried out correctly and the windshield is functioning as it should. Our guide will explore key checks that you must make after a windshield replacement.
Your Comprehensive Guide: Key Things to Check After a Windshield Replacement
Check out these essential checks for your newly replaced windshield. Here are key things to check after a windshield replacement.
Inspect the Seal
First and foremost, look at the windshield’s perimeter. The sealant should be evenly applied all around the edge without any gaps or bubbles. Any inconsistencies may result in water leaks during heavy rain, a whistle of wind while you’re driving at high speed, or worse, the windshield popping out in an accident. If you spot anything out of the ordinary, report it immediately to the installation company.
Check for Scratches or Damage
A brand-new windshield should be free of any defects. Take your time to inspect it thoroughly under good light. Look for any scratches, chips, or cracks that may have occurred during transportation or installation. While it may be rare, such defects can compromise the structural integrity of your windshield, posing a safety hazard.
Test the Wipers
Another key area to check is how the windshield wipers interact with your new windshield. Turn them on and observe their movement. They should glide smoothly across the windshield without causing any streaks or noise. If the wipers are juddering or not making proper contact with the glass, it may indicate an improper windshield fit.
Check for Wind Noise
After installation, it’s important to drive your car and listen for any abnormal wind noise. If you hear a whistling sound, it may indicate an improperly sealed windshield. Not only can this be annoying, but it also poses a safety risk as the windshield might not be secure.
Look at the Molding
Ensure the molding around the windshield is perfectly aligned and straight. It should be flush with the vehicle’s body with no protruding parts. Any misalignment can lead to future issues such as water leaks or wind noise.
Verify Rear View Mirror and Sensors Installation
If your vehicle is equipped with advanced driver assistance systems (ADAS), like lane departure warning or automatic emergency braking, it’s crucial to check if the sensors mounted around the windshield are working properly. They are often recalibrated during a windshield replacement. The same goes for the rearview mirror. It should be securely attached and properly positioned.
Glass Quality
Finally, take a close look at the glass quality. Your new windshield should be clear without distortions when you look through it. Any waviness or unevenness can impair your vision, which can be especially dangerous at high speeds or in certain light conditions.
Examine the Interior of the Car
After the replacement, it’s necessary to examine the interior of your car thoroughly. Check for any signs of leftover glass shards, especially on the seats, floor mats, dashboard, and vents. Though professionals usually clean up after the replacement, it’s always safer to double-check to avoid any potential injury.
Ensure Proper Defrosting Function
The defrosting function is critical for your safety during colder weather. To check if it’s working correctly, simply turn on the defrost feature and watch if the windshield clears up evenly and efficiently. In case the defrost lines aren’t functioning as they should, it could indicate a problem with the installation or a fault in the windshield itself.
Check the Auto-dimming Feature.
If your car is equipped with an auto-dimming rearview mirror, this should also be checked after a windshield replacement. This feature minimizes the glare from headlights behind you at night. If your mirror isn’t dimming as it should, it might mean the sensor was not properly reconnected during the windshield replacement.
To sum up, while replacing a windshield may seem like a simple task, it is a job that requires precision and care. Don’t rush away after a windshield replacement. Take the time to carry out these checks before you hit the road. By doing so, you’re ensuring your vehicle is safe, which ultimately protects you, your passengers, and other road users. If you do find any issues, don’t hesitate to contact Nuvision for our impeccable service.
